Louisville contemporary sculpture

The "Hotel Series" is Complete by Mike McCarthy

“My Heart” - Part of the “Hotel Series” - Alabaster

“My Heart” - Part of the “Hotel Series” - Alabaster

So what do you do when you are stuck out of town for work? More importantly, when you are there for several weeks at a time? Do you watch a lot of movies, go for walks, workout at the hotel pool or gym? All of those are fine ideas. But what I think is a better one is to bring along a piece of stone and do a little carving! That’s right, I said bring along a piece of stone and carve away.

“From the Beginning to the End” - Part of the “Hotel Series” - Indiana Limestone

“From the Beginning to the End” - Part of the “Hotel Series” - Indiana Limestone

“Masquerade” - Part of the “Hotel Series” - Soapstone

“Masquerade” - Part of the “Hotel Series” - Soapstone

This does take a little planning and thought. For instance, stone is heavy. So, the piece you choose to bring along has to be a small enough piece that it will fit in your luggage and not make it weigh too much. You also need tools. The only tools I think travel well, don’t make a mess, and don’t make too much noise are rasps. However, rasps can not be carried on a plane, so you have to check a bag. Be prepared to have your luggage checked by the TSA. I typically get one of their love notes in my luggage saying they have inspected the contents. Finally, you have to prepare the room you are going to work so you don’t create a mess for the cleaning staff. I typically use a towel laid out that I can then shake into a garbage bag or can.

Thought it all through? Good, you are all set. Think of the great dedicated carving time you could have when you are stuck in a town where you don’t really want to be. Bring along a stone and some tools and create some beautiful art!

The three photos in this article are all pieces I worked on over the last month while out of town for an installation. I only did the rough out then brought them back for the final sanding, polishing and basing. Bringing along some stone is a great way for me to not hate having to travel for work.

"Life Balance", a Sculpture in African Wonderstone - The First Time I have Carved this Stone by Mike McCarthy

This contemporary sculpture titled “Life Balance” is the first time I have carved a piece in African wonderstone. It is a bit of a deceptive stone in that it is easy to shape, but difficult to polish. The other difficulty I had with this piece was basing it. I had the piece completed for over 3 months ago but couldn’t figure out the size and shape of the base. I think I finally got it. I like the way the small base emphasizes the balancing of the piece. It has a very small point of connection that gives it that precarious feel and further emphasizes the balance aspect. I am forever trying to get tiny connection points on my sculptures! Sometimes, I drive myself nuts!!

IMG_1358.jpeg

See My Indiana Limestone Vessel Carved from Beginning to End by Mike McCarthy

Over the last few weeks, I have taken a little time away from a larger project to carve a smaller piece. I always have several pieces going at the same time, especially when I am working on a larger work. In the video below, I have recorded a time lapse of the carving of this sculpture from its start as a rough block, all the way to the finish process. You will see that the most time spent is the sanding. It is the part that makes this piece of limestone able to hold the gloss sheen that the sealer adds. I also used linseed oil on this piece to give it some color. Watch the video and let me know what you think.

Carving a Limestone Vessel by Mike McCarthy

I started carving an Indiana Limestone vessel a few months ago. However, I have been so busy with other projects that I have not been able to get back to it. The stone is a cut off from my Norton commission, "Cor Liberum". I am happy to say that the off-fall from that project has provided a steady source of stone for a while.

This piece will be similar to the piece I carved about a year ago, "Peace Lilly". I will be sanding and polishing this piece to at least 400 grit paper and then putting a sealer on it. I will also add a wax finish to the piece. It will give a rich color to the piece that is not typical of limestone. However, it is a very warm and pleasing finish for indoor pieces.

“If The Spirit Is Willing” is Installed at Josephine Sculpture Park by Mike McCarthy

Mark Hendren loading my sculpture. 

Mark Hendren loading my sculpture. 

All things happen for a reason. Last year at the outdoor sculpture show at Hidden Hill Nursery and Sculpture Garden two of my three pieces sold. That is a great show, but I was a little disappointed because I thought the one that did not sell was the strongest piece. “If the Spirit is Willing” was the sculpture that did not sell. 

Fast forward a year. I decided to enter “If the Spirit is Willing” into a juried show at Josephine Sculpture Park in Frankfort, KY. There were minimum size requirements for this show so that limited the entries. However, of the 20 entries, my sculpture was one of eight selected. That is always a great feeling to get that notice that your work has been accepted.  

So on Thursday I met Karen Terhune over where my sculpture was, picked her up and brought her home  then my next door neighbor, Mark Hendren loaded it on his trailer and I drove it out to the park.

The steel piece sitting behind my sculpture will be moved. 

The steel piece sitting behind my sculpture will be moved. 

I met the owner of the park, Melanie VanHouten at about 8:45. We set a limestone base and then the real fun began. We got to play with a big crane! I think cranes are an amazing engineering feat. The operator was incredible. He boomed over and dropped the hook right where I needed it. He lifter and set the dry fit with the smoothest touch I have seen. Lifted so I could get the safety out and reset in no time. Even though he set it so fast, nothing seemed rushed. It was great. 

So, if you are in Frankfort, KY, come out and see “If the Spirit is Willing” and the rest of the sculpture at Josephine Sculpture Park. ​