New Sculpture Completed

Over the past two months I have been frantically working on getting ideas out of my head and into stone. I have so many ideas that I was not able to get to while working on my Norton Hospital commission. I also had several ideas started before the commission and hadn't been able to get back to them to finish them. So finally, I have completed my first gallery small sculpture in months.

This piece is untitled as yet, although I have had the suggestion that it looks like a sting ray. That sounds interesting, so that may end up as the title. Even though the title is not complete, the rest of the piece is. This was one of the pieces I started before the Norton commission. It was a very difficult stone to carve. All of the veining created some fragility. I spent a lot of time changing direction and pressure to keep pieces from breaking off. There is also a big difference in the density throughout the stone. I would be carving along on one of the harder areas and all of the sudden the grinder would dig in. It was tough to control the pace of the tools. All that bings said, those difficulties are caused by things that create such a beautiful stone! So, as soon as I finished this piece, I ordered some more pieces!

Starting A New Commission

I recently finished my largest commission and have been working on doing some non-commissioned pieces. That is very freeing, but it is also very fun and amazing that someone is interested enough in my work that they would be willing to trust me to create a piece for them without seeing it completed. So today I started in on a new commission. 

My new piece will be a fountain that will match a bench that the owners purchased from me a few years ago. I have never done a fountain before so this will be a cool experience. I will be carving this piece out of Indiana Limestone, the same stone as the bench they already have.

Starting on a new piece is fun, but there is a bit of not so fun part to it. One of the pieces I want to use is buried under a ton (probably literally) of other stone. So the not so fun parts of this commission will be to dig out this piece of stone! 

New Sculpture in the Works

​From June of 2017 to April of 2018, I really only worked on my largest commission, “Cor Liberum”, a sculptural experience for Norton Hospital, Audubon campus. While I enjoyed working on that piece, because of the scale and timeframe, I did not work on anything else. I have so many ideas in my head that need to get out. This is the only time I wish I were a painter. They can move a lot faster. 

​So, once I finished the Norton piece, I have been scatter brained. I started carving so many pieces I can’t keep them strait. Slowly I am narrowing down the work. I finished two pieces which helped. I have set two others aside. I work on one just on the weekends and the final one, the largest of them, is also closing in on being done. This is good as I have two new commissions to get started on.  

Bordiglio Marble is a Beautiful Stone, But Difficult to Carve

I started carving a nude in Bordiglio marble, an Italian marble, the first time I have carved this stone. I don't know if it is all of the Bordiglio, but at least this particular piece has such strong bedding planes, that the stone is actually fragile. With this work that I am carving on now, the goal is to get it very thin and delicate. I have lost one piece of it already and have a section that feels a little iffy. So, the stone typically tells you which way it wants to go, this one maybe dictate a little stronger than most. Even with that challenge, the stone is so pretty, that it is well worth the struggle.

A Change in Direction Continued

in. Recent post, I talked about how sometimes you think you know where you are goi with a piece and then the stone says “nope”. Then there are times when, after you and the stone have agreed on a direction, friends give you ideas to consider for a different direction. On this piece, both occurred. 

This piece started its life as a part of the leg of my Norton commissions large figure. When standing the figure up, it broke off. After I stopped crying and really took a look at this piece, I liked the shap of the piece. With a little refinement, I thought I had something, but the stone disagreed.

In the first photo, you can see the original idea starting to take shape  however, the stone just kept fighting me. As I worked around the stone, certain views worked, then others would work, but the stone wouldn’t cooperate to look right as a whole. So, I finally listened.

the second photo shows where i got to after listening to the stone. By freeing up part of the front, it started to feel right. I moved on and finished carving and sanding. I decided to stain it and was contemplating how to base it.

I posted the third photo on Facebook and got an interesting suggestion. One of my friends suggested hanging the piece rather than basing it. I haven’t totally decided, but am leaning towards that. 

Check back and see how it turns out.  

Using Wood Stain on Indiana Limestone

I have started experimenting with some of my limestone pieces. I have used wood stains to add a different feeling to the work. This is my second attempt. I don’t have a title for this one yet, and it is still in progress. I have to figure out how to base it. I have had many suggestions to hang it. But, that is beside the point. As you can see, this piece is not the standard color of Indiana limestone. I used a blue universal wood dye to add color. I think it is pretty cool. What I don’t know is how it will hold the color if it becomes an outdoor sculpture. That is one of the fun parts of being an artist is that you get to experiment to see what happens. 

Ever Wanted To Learn To Carve Stone? Now's Your Chance!

The Kentucky Artisan Center in Berea shared this post on their facebook page. I will be teaching a beginning carving class at the center this summer. If you ever wanted to learn to carve stone, now's your chance. We will be carving an abstract bird. Does it look a little familiar? it is the model for the birds from "Cor Liberum". Don't wait, sign up!

Kentucky Artisan Center at Berea

April 13 at 10:10am · 

We will be holding Learnshops here at the Kentucky Artisan Center from July 13- 26. Berea Tourism's website for the Festival of Learnshops is now open for registering for an amazing array of creative opportunities. 
Mike McCarthy will be teaching a stone carving workshop - carving a bird from limestone like shown here. His workshop will be held at the Center on July 14. Go to www.visitberea.com and look for "Festival of Learnshops" - and go to the "wood, metal, stone" section.

A Change In Direction

This is the start of the piece. I thought it needed the base as well as the solid form above.

The stone disappeared. 

Sometimes when I first start an abstract piece, I have a set idea for where I want to go with it. As I get into the piece, it either says “yes, this is where I want to go”, or “I don’t think so!”  My current piece was the latter. I started with a piece that had broken off of the caregiver in “Cor Liberum”. When I first say it, i thought I saw an elegant solid shape that just needed some minor adjustments to give it better balance. As I started making those adjustments, I just felt it wasn’t getting there. So, I decided to cut about 4 inches off the bottom and cut a groove down the center of it. These are not easy decisions as they can ruin hours of work and create another rock for the scrap pile. (When I used to carve wood, these decisions pften created fire wood.) however, sometimes the stone agrees with your decisions. With this piece, I think you will agree that the stone did want to go in this direction. 

Another view